42
8
STORING IN PM CHANNELS
1
Confirm that the following conditions have been
satisfied:
• The transceiver is in reception mode.
• Scan is not being used.
• Microphone Control is OFF.
2
Configure the transceiver with your desired settings.
• For the items that can be stored, see page 40.
3
Press
[F]
,
[P.IN]
.
• The PM channel numbers 1 to 5 appear and blink at the
bottom of the display.
4
Press
[1]
to
[5]
corresponding to your desired PM
channel.
• The settings listed in page 40 are stored in the PM
channel.
RECALLING A PM CHANNEL
1
Press
[PM]
.
• The PM channel numbers 1 to 5 appear at the bottom of
the display.
2
Press
[1]
to
[5]
corresponding to your desired PM
channel.
• The contents of the selected channel are recalled.
• The current PM channel number appears at the upper
right corner. “
s
” before “PM” indicates that Auto PM
Store mode {page 43} has been selected.
• To exit PM Recall mode, press
[PM]
,
[OFF]
.
Note:
You cannot recall a PM channel while transmitting.
Summary of Contents for TM-V708A
Page 92: ......
