Kenwood TM-V708A Instruction Manual Download Page 58

Page: 58 / 92

CALL/VFO SCAN

Use Call/VFO Scan to monitor both the Call channel and
the current VFO frequency on the selected band.

Select your desired band.

Press

[VFO]

Select your desired frequency.

Press

[CALL] (1 s)

to start Call/VFO Scan.

• The 1 MHz decimal blinks while scanning is in progress.

To exit Call/VFO Scan, press

[CALL]

again.

CALL/MEMORY SCAN

Use Call/Memory Scan to monitor both the Call channel
and your desired memory channel.

Recall your desired memory channel.

Press

[CALL] (1 s)

to start Call/Memory Scan.

• The 1 MHz decimal blinks while scanning is in progress.

• The Call channel on the same band as of the selected

memory channel is used for Scan.

To exit Call/Memory Scan, press

[CALL]

again.

Note:

The selected memory channel is scanned even if it has been

locked out.

Summary of Contents for TM-V708A





























































































Search results

Summary of Contents for TM-V708A

Reviews:

Related manuals for TM-V708A

Brands by name

Popular brands

Kenwood TM-V708A, Instruction Manual

Search results

Summary of Contents for TM-V708A

Reviews:

Related manuals for TM-V708A

Brands by name

Popular brands