32
6
4
Press
[OK]
to program the identified frequency in
place of the currently set tone frequency.
• The Tone function will remain ON. You can press
[TONE]
to switch the Tone function OFF.
• Press
[ESC]
if you do not want to program the identified
frequency.
• Press
[SCAN]
while the identified frequency is blinking,
to resume scanning.
TONE FREQUENCY ID
This function scans through all tone frequencies to
identify the incoming tone frequency on a received
signal. You may use this function to find which tone
frequency is required by your local repeater.
1
Press
[TONE]
to switch the Tone function ON.
• “T” appears when the Tone function is ON.
2
Press
[F]
,
[T.SEL]
.
• The current tone frequency appears and blinks.
3
Press
[SCAN]
to activate the Tone Frequency ID.
• “T SCAN” appears and blinks.
• Scan starts when signals are received.
• To reverse the scan direction, turn the
Tuning
control
clockwise (upward scan) or counterclockwise
(downward scan). You can also press Mic
[UP]
/
[DWN]
.
• To end this function, press
[ESC]
.
•
When the tone frequency is identified, the identified
frequency appears and blinks.
Summary of Contents for TM-V708A
Page 92: ......
