Kenwood RA-5000 Instruction Manual Download Page 9

Page: 9 / 60

English

Before use

Names and functions of parts

(Power) key

Standby indicator

Press to switch this unit ON or to put it
to standby.
The standby indicator lights in the
standby mode.

Display

DOLBY VIRTUAL SPEAKER

indicator (RA-5000 only)

Remote sensor

VOLUME CONTROL knob

PHONES jack

Use for headphone listening.

SPEAKERS ON/OFF key

ﬂ

Press to turn the speakers ON/OFF.

INPUT SELECTOR

∞

key

Press to select the input source.

BAND key

Press to select the broadcasting band.

AUTO/MONO key

Press to switch the radio tuning mode
between auto tuning and manual
tuning.

INPUT MODE key

ﬂ

Press to select the input mode.

SETUP key

Press to set up this unit.

Illumination

MULTI CONTROL

∞

key

Press to select a setting item.

TUNING key

Press to select a radio station.

RV-7000/RV-6000:

EASY SETUP key

•

Use for Easy Setup of the speakers.

RA-5000:

TONE key

Press to adjust the tone.

RV-7000/RV-6000:

LISTEN MODE key

Press to select the listen mode.

RA-5000:

DIMMER key

Press to switch the brightness of the
display and indicators.

RV-7000/RV-6000:

VIRTUAL SURROUND key

Press to switch the Virtual Surround
function ON/OFF.

RA-5000:

DOLBY VIRTUAL SPEAKER key

Press to switch the Dolby Virtual
Speaker function ON/OFF.

Main unit

PURE AUDIO MODE key

Press to switch the STRAIGHT DECODE
MODE/PURE AUDIO MODE ON/OFF.
(RV-7000/RV-6000)

Press to switch the PURE AUDIO
MODE ON/OFF. (RA-5000)

(

AV AUX jacks

Connect a video camera, videogame
machine, etc.

Standby mode

While the standby indicator is lit, a small
amount of power is supplied to the system
to back up the memory. This is called
standby mode. Under the condition, the
system can be turned ON by the remote
control unit.

B60-5827-08_00_En.indd 9

10.8.3 11:07:38 AM

Summary of Contents for RA-5000





























































Search results

Summary of Contents for RA-5000

Reviews:

Related manuals for RA-5000

Brands by name

Popular brands

Kenwood RA-5000, Instruction Manual

Search results

Summary of Contents for RA-5000

Reviews:

Related manuals for RA-5000

Brands by name

Popular brands