Kenwood RA-5000 Instruction Manual Download Page 12

Page: 12 / 60

RV-7000/RV-6000/RA-5000

Before use

Names and functions of parts

Remote control unit

Operation

Operate the remote control unit by pointing it to the remote
sensor of this unit.

When this unit is in standby mode (which is indicated by lighting
of the standby indicator), pressing the [

RECEIVER] key turns

this unit ON. Pressing the [

RECEIVER] key again turns this unit

OFF (standby mode).

When operating the connected components, always press
the input source key of the component you need to operate
first to swith the remote control unit to the selected input
source mode, and then press the keys of the corresponding
operation.

Operating range (Approx.)

Remote sensor

Standby indicator

Loading batteries

Remove the cover.

Insert batteries.

Insert two (R03) batteries following the polarity indications.

Close the cover.

• The supplied batteries may have shorter lives than

ordinary batteries due to use during operation checks.

• When the remote-controllable distance gets shorter than

before, replace both batteries with new ones.

CAUTION

Do not leave the battery near fire or under direct sunlight.
A fire, explosion or excessive heat generation may result.

B60-5827-08_00_En.indd 12

10.8.3 11:07:40 AM

Summary of Contents for RA-5000





























































Search results

Summary of Contents for RA-5000

Reviews:

Related manuals for RA-5000

Brands by name

Popular brands

Kenwood RA-5000, Instruction Manual

Search results

Summary of Contents for RA-5000

Reviews:

Related manuals for RA-5000

Brands by name

Popular brands