Kenwood RA-5000 Instruction Manual Download Page 51

Page: 51 / 60

English

Sound ad

men

Dimension (RV-7000/RV-6000 only)

Pro Logic IIx Music and Pro Logic II Music mode only

The center of the acoustic field can be moved toward the front
or rear.

Press [SOUND] repeatedly to select "DIMENSION".

Use [MULTI CONTROL

∞

] to move the acoustic

field to the front or rear.

Dimension indicator

Sound center moved
toward the rear

Sound center moved
toward the front

Center width (RV-7000/RV-6000 only)

Pro Logic IIx Music and Pro Logic II Music mode only

The center channel audio can be distributed to the front left and
right speakers to enhance the width of the sound in front of the
listener.

Press [SOUND] repeatedly to select "CENTER

WIDTH".

Use [MULTI CONTROL

∞

] to move the acoustic

field to the left or right.

Center width indicator

When the indicator extends to the left and right wider, more part of the
center channel audio is distributed to the front left and right speakers.

• This setup is not available when the center speaker setup

is "OFF".

Center image (RV-7000/RV-6000 only)

DTS Neo:6 Music mode only

The output level of the center speaker can be adjusted.

Press [SOUND] repeatedly to select "CENTER

IMAGE".

Use [MULTI CONTROL

∞

] to adjust the center

speaker output.

More part of the center channel audio is distributed to the front left and
right speakers as the number increases.

• This setup is not available when the center speaker setup

is "OFF".

B60-5827-08_00_En.indd 51

10.8.3 11:08:38 AM

Summary of Contents for RA-5000





























































Search results

Summary of Contents for RA-5000

Reviews:

Related manuals for RA-5000

Brands by name

Popular brands

Kenwood RA-5000, Instruction Manual

Search results

Summary of Contents for RA-5000

Reviews:

Related manuals for RA-5000

Brands by name

Popular brands