20
RV-7000/RV-6000/RA-5000
Co
n
n
e
c
ti
o
n
s
Using the HDMI function
The HDMI setup is required to use the HDMI function. See <HDMI
setup>
‹
.
Flow of video signal
The digital video signal input from the HDMI input terminal is
output only at the HDMI monitor output terminal.
Flow of audio signal
The digital audio signal input from the HDMI input terminal
is output at the speakers connected to this unit. It can also be
output at the TV monitor connected to this unit according to the
HDMI setup. (See <HDMI setup>
‹
.)
• An HDMI/DVI converter cable is necessary to connect a
TV monitor with a DVI input terminal. The TV monitor also
needs to be compatible with HDCP (High-bandwidth
Digital Contents Protection). Note that the video may be
unable to be monitored depending on the combined
components.
• When components are connected through the
HDMI connection, it takes a certain period before the
video/audio are output because they need mutual
authentication.
• If the video and/or audio are not output normally, turn all
of the connected components off then on, and try again.
• If the resolution of the incoming video signal is different
from that of the TV, no video is output. In this case, adjust
the resolution on the BD/DVD player.
• Use an certified High Speed HDMI™ cable (Category 2
cable) for connection.
To use the ARC function of this unit, be sure to use a cable
carrying the logo shown above.
HDMI MONITOR IN
HDMI OUT
HDMI OUT
TV Monitor
Connecting components equipped with HDMI terminals
The HDMI connection can transfer both the video and audio signals through a single HDMI cable. It makes possible entertainment of high-
quality video including 3D video as well as high-quality audio. The HDMI connection also enables interlocking of the power of the TV with
that of this unit. (See <HDMI setup>
‹
.)
1
Using an HDMI cable, connect the HDMI input terminal ([HDMI 1], [HDMI 2], [HDMI 3] or [HDMI 4] terminal) of
this unit to the HDMI output terminal of a playback component such as a Blu-ray disc player.
2
Using another HDMI cable, connect the [HDMI MONITOR OUT] terminal of this unit to the HDMI input terminal
of the TV monitor.
Digital Tuner and etc.
Blu-ray Disc Player
B60-5827-08_00_En.indd 20
10.8.3 11:07:49 AM
