8
RV-7000/RV-6000/RA-5000
Before use
Speaker setup
(Detailed Setup)
The detailed settings allow you to enjoy full performance of
the receiver according to the environment of your listening
room.
For creating the best listening environment, Kenwood
recommends to perform the setup at the listening position.
6(783
08/7,&21752/
Speaker setup flow
Speaker settings consist of 7 elements.
1
Enter the Detailed Setup mode.
[SETUP]
Use [MULTI CONTROL
O
/
] to select an item to set.
[SETUP]
Elements
Display
Setting
Speaker Configuration
"SP SETUP"
Selects whether each speaker channel is
used or, if used, its size.
Speaker Level
"TESTTONE"
Selects the output level from each
speaker.
Speaker Distance
"DISTANCE"
Selects the distance between each
speaker and the listening position.
Crossover
"CROSSOVER"
Sets the lower limit of the bass
frequencies reproduced from the speakers
set to "NML" in the "SP SETUP". The
frequencies below the frequency set here
are distributed to other speakers (those
set to "LRG" and the subwoofer).
2
Set each item.
See the followings for each setup item.
Playback
92/80(
,13876(/(&725
/
92/80(&21752/
1
Select a source.
Use the Input source keys on the remote control unit
to select a source.
Or use [INPUT SELECTOR] key on the main unit.
Example: Display when HDMI 1 input source is
selected
2
Start playback from the selected source.
3
Use [VOLUME
/
o
] to adjust the volume.
4
Enjoy various surround effects.
You can enjoy a variety of listen modes. (See
<Surround play using the listen mode>
G
.)
The surround effects can be fine tuned according
to the selected input source. (See <Adjustments
according to the playing source>
E
.)
t
If the input signal uses a number of channels larger
than the number of speakers in use, the signals are
distributed automatically according to the available
speakers.
Continued
Input source keys
e
to
t
e
]
s
How to read this manual
The operating instructions given in this manual assume that the user mainly operates the receiver using the remote control unit. When the
same operation is also available on the main unit, the operating method is indicated in illustrations.
The [VOLUME CONTROL] knob on the main unit are operated by turning the knobs clockwise or counterclockwise.
The knob on the main unit
is pointed with an arrow to
indicate that it can be turned
in either direction.
The keys and controls used in
the operations described in each
section are indicated with their
names.
The descriptions of the functions
available only on the remote
control unit are accompanied only
with the illustration of the remote
control unit. The descriptions of
the functions available only on the
main unit are accompanied only
with the illustration of the main
unit.
The names of the operated keys
or knobs are enclosed inside
brackets.
This icon indicates supplementary
information, restrictions in
operation or tips on operation.
When a key is used to select
an option, the list of options is
shown in the form of a table.
This icon indicates that the
description continues on the
next page.
• In this manual, RV-7000 is used for the illustrations of front panel and rear panel.
• The illustrations of the main unit display panel and the examples of operations are shown for the purpose of explanation and may
differ from the actual view or operation.
This icon indicates that the function can be operated (or
recommended to operate) only with the unit displayed with the icon.
: main unit
: remote control unit
B60-5827-08_00_En.indd 8
10.8.3 11:07:35 AM
