Kenwood RA-5000 Instruction Manual Download

Page: 52 / 60

RV-7000/RV-6000/RA-5000

nve

t f

92/80(

087(

',00(5

92/80(&21752/

63($.(56212))

',00(55$

Display dimmer adjustment

The dimmer function lets you select the brightness of the display
and indicators of this unit. You might find this useful if you darken
your room to watch movies or listen to music.

Press [DIMMER].

The brightness of the display changes among the three
available settings. Select the brightness level you find most
pleasing.

Slightly dark

Dark

Normal

• When Dark is selected, the illumination is turned off.

Listening with headphones

Press [SPEAKERS ON/OFF] so that the speaker

indicator goes off.

Make sure the "SP" indicator is turned off.

If you turn off all of the speakers when in surround mode,
the surround mode will be canceled as well, resulting in
stereo playback.

Connect headphones to the [PHONES] jack.

3+21(6

Adjust volume.

CAUTION

Excessive sound pressure from earphones or headphones can
cause hearing loss.

Muting the sound

Press [MUTE].

"MUTE" indicator blinks.

To cancel

Press [MUTE] again so that the "MUTE" indicator goes off.

MUTE can also be deactivated by adjusting volume.

Convenient functions

Illumination

B60-5827-08_00_En.indd 52

10.8.3 11:08:41 AM

Summary of Contents for RA-5000





























































Search results

Summary of Contents for RA-5000

Reviews:

Related manuals for RA-5000

Brands by name

Popular brands

Kenwood RA-5000, Instruction Manual

Search results

Summary of Contents for RA-5000

Reviews:

Related manuals for RA-5000

Brands by name

Popular brands