Kenwood NX-5700 Service Manual Download Page 47

Page: 47 / 138

(No.RA020<Rev.002>)1-47

4.
Frequency

*The Frequen-

cy adjust-
ment can be
performed
only in PC
test mode.

1) Adj item:

[Frequency]
SSG output:
-20dBm (22.4mV)
(CW (without mod-
ulation))

Caution:

Perform the fre-
quency adjustment
under the following
conditions.

• Temperature range

of +20

C to +33

(+68.0

F to

+91.4

F).

(The temperature is
displayed on the
Frequency adjust-
ment screen of the
KPG-D1/D1N and
the LCD of the
transceiver.)

• Use an accuracy of

0.003ppm for the
SSG. (Use a stan-
dard oscillator if
necessary.)

SSG

Panel ANT

Panel [Panel

tuning
mode]
[



[



]

[PC
test
mode]
[

←

[

→

]

[PC test mode]

Press [Start] button of
"Auto Tuning".
Press [Apply] button to
store the adjustment
value after the automatic
adjustment has
finished.

[PC test mode]

“IF20” value = With-
in 0±10 digits. The
value of “IF20” will
become around “0”
after the adjustment
has finished.

Remark:

“Frequency” is
adjusted under
receiving condition
with SSG.

5.
RTC
Corre-
citon

1) Adj item:
[RTC]
Adjust:[****]
Press [ ] key
to store the ad-
justment val-
ue.

1) Adj item:

[RTC Correction]
Data: {****]

Press [Apply] button
to store the adjust-
ment value.

Fre-
quency
Counter

Panel

TEST

POINT

(CN715)

[Panel
tuning
mode]
[



], [



]

[PC test
mode]
[

←

], [

→

]

[Panel tuning mode]

Press [ ] key to store
the adjustment value.

[PC test mode]

Press [Apply] button to
store the adjustment
value.

Remaks:

Change the adjust-
ment value so that
the frequency cur-
rently displayed on
“Crystal Oscillation
Frequency” on the
PC window and the
frequency currently
displayed on the
frequency counter
are in agreement.

Item

Condition

Measurement

Adjustment

Specifications

/Remarks

Panel tuning

mode

PC test mode

Test-

equip-

ment

Unit

Ter-

minal

Unit

Parts

Method

Summary of Contents for NX-5700











































































































































Search results

Summary of Contents for NX-5700

Reviews:

Related manuals for NX-5700

Brands by name

Popular brands

Kenwood NX-5700, Service Manual

Search results

Summary of Contents for NX-5700

Reviews:

Related manuals for NX-5700

Brands by name

Popular brands