Kenwood NX- 1200A User Manual Download Page 71

Page: 71 / 85

SCRAMBLER (ANALOG)/ ENCRYPTION (NXDN/ DMR)

Note:

◆

The following types of encryption are available depending on the protocol
used.
NXDN : Bit scrambling (built-in encryption function)
DMR : Bit scrambling (built-in encryption function) and Enhanced Encryption

◆

The Enhanced Encryption is a software option. Ask your dealer for details
concerning the Enhanced Encryption settings.

SECURE (ENCRYPTED) TRANSMISSION

Press the button programmed as

[Scrambler/Encryption]

to switch the

transceiver to secure (encrypted) transmission.

• Alternatively, press the button programmed as

[Menu]

to enter Scrambler/

Encryption Mode using the Menu Mode.

• The Scrambler/Encryption indicator “ ” appears when the function is turned

ON.

• Pressing the

PTT

switch after the Scrambler or Encryption function has been

turned ON encrypts the transmitted signal.

SELECTING THE SCRAMBLER CODE

Press the button programmed as

[Scrambler/Encryption Code]

to enter

Scrambler/Encryption Code Mode.

• Alternatively, press the button programmed as

[Menu]

to enter Scrambler/

Encryption Code Mode using the Menu Mode.

Press the

[

]

and

[ C> ]

buttons to increase or decrease the Scrambler

code.

• Up to 16 Scrambler codes can be used.

Press the

[ S ]

button to set the new Scrambler code.

Summary of Contents for NX- 1200A






















































































Search results

Summary of Contents for NX- 1200A

Reviews:

Related manuals for NX- 1200A

Brands by name

Popular brands

Kenwood NX- 1200A, User Manual

Search results

Summary of Contents for NX- 1200A

Reviews:

Related manuals for NX- 1200A

Brands by name

Popular brands