Kenwood NX- 1200A User Manual Download Page 54

Page: 54 / 85

Send the GPS Data

[Analog/ NXDN/ DMR]

Allows you to send your positioning data to the base station when a GPS speaker/
microphone has been installed.

• When the power is turned ON and/or the reception condition of the GPS

satellite is poor, positioning may take longer to complete.

PF Button:

Press the programmed button to send GPS data.

• Beep A (1 beep) sounds.

Menu Mode:

Select “SEND GPS” and press the

[ S ]

button to send GPS data.

• When GPS data transmission is completed and “COMPLETE” is displayed for

1 second.

Short Message

[NXDN/ DMR]

Allows you to send short messages such as an address, telephone number, etc.

PF Button:

Press the programmed button to enter Short Message Mode.

Menu Mode:

Select “SDM MODE” and press the

[ S ]

button to enter Short

Message Mode.

Press the

[ <B ]

and

[ C> ]

buttons to select a Short Message from the list

(NXDN/ DMR).

Press the

PTT

switch

Side 2

button to send short messages.

Speaker Attenuation

[Analog/ NXDN/ DMR]

Temporarily reduce the volume level of the speaker of the transceiver and
speaker/ microphone.

PF Button:

Press the programmed button to change the Speaker Attenuation On or Off.

Summary of Contents for NX- 1200A






















































































Search results

Summary of Contents for NX- 1200A

Reviews:

Related manuals for NX- 1200A

Brands by name

Popular brands

Kenwood NX- 1200A, User Manual

Search results

Summary of Contents for NX- 1200A

Reviews:

Related manuals for NX- 1200A

Brands by name

Popular brands