68
SCAN REVERT
The Scan Revert channel is the channel selected when you press the
PTT
switch
to transmit during scan. Your dealer can program one of the following Scan Revert
channels:
•
Selected:
The last channel selected is assigned as the new revert channel.
•
Se Talkback:
If the channel has been changed, the newly selected
channel is assigned as the new revert channel. The transceiver “talks back” on
the current channel.
•
Priority 1/ Priority 2:
If your dealer has programmed a Priority channel (either
Priority 1 or Priority 2), this channel is the revert zone-channel.
•
Priority 1 + Talkback/ Priority 2 + Talkback:
If your dealer has programmed
a Priority channel (either Priority 1 or Priority 2), this channel is the revert
zone-channel. The transceiver “talks back” on the current receive channel.
•
Last Selected:
The last channel on which you received a call is
assigned as the new revert channel. The transceiver “talks back” on the
current channel. If the channel has been changed, the newly selected channel
is assigned as the new revert channel.
Summary of Contents for NX- 1200A
Page 1: ...B5A 3233 00 02_XMC_EN USER MANUAL NX 1000 series ...
Page 85: ... 2021 ...
