81
Semi-VOX Operation
1
Connect a headset to the transceiver.
• The VOX function does not activate when a headset is not connected to
the accessory terminal of the transceiver.
2
Press the button programmed as
[VOX Function]
.
• Alternatively, you can press the button programmed as
[Menu]
to enter
VOX Mode using the Menu Mode.
• Beep A (1 beep) sounds and the “ ” indicator appears on the display.
3
To transmit, press the
PTT
switch.
4
Release the
PTT
switch.
5
Transmission continues while speaking.
6
When you finish speaking, transmission ends.
To turn the Semi-VOX function OFF, press the button programmed as
[VOX
Function]
button again.
• Beep B (2 beeps) sounds and the “ ” indicator will disappear from the
display.
VOX Gain Level
Sets the Microphone input sensitivity of the VOX operation.
1
Connect a headset to the transceiver.
2
Press the button programmed as
[VOX]
.
• The current VOX Gain level appears on the display.
3
Press the
[ <B ]
or
[ C> ]
button to increase or decrease the VOX Gain level.
• The VOX Gain can be adjusted from levels 1 to 10.
4
While adjusting the level, speak into the headset microphone to test the
sensitivity level. (Your voice is not transmitted during this test procedure.)
• When sound is recognized, the LED lights yellow.
5
Press the
[ S ]
button to save your new setting.
Summary of Contents for NX- 1200A
Page 1: ...B5A 3233 00 02_XMC_EN USER MANUAL NX 1000 series ...
Page 85: ... 2021 ...
