Kenwood NX- 1200A, User Manual

Page: 62 / 85

62
Zone Delete/Add [Analog/ NXDN/ DMR]
Allows you to include or omit each Zone in the Multi-Zone scan sequence.
1
Select your desired zone.
2 PF Button:
Press the programmed button to switch the Zone Delete/Add
status of the channel.
Menu Mode: Select “ZONE D/A” and press the [ S ] button to switch the Zone
Delete/Add status of the channel.
• When a zone is added to scan, Beep A (1 beep) sounds and the “ ”
(left side) indicator appears on the display.
• When a zone is deleted (not include in scan), Beep B (2 beeps) sounds
and the “ ” (left side) indicator disappears on the display.
Zone Select [Analog/ NXDN/ DMR]
Selector:
Turn the
Selector
to select the zone number.
Zone Up/Down
Selector:
Turn the
Selector
to increase/ decrease the zone number.
Zone Up/ Zone Down [Analog/ NXDN/ DMR]
PF Button:
Press the programmed button to increase/ decrease the zone number.
Zone Up (Continuous)/ Zone Down (Continuous)
[Analog/ NXDN/ DMR]
PF Button:
Hold down the programmed button to continuously increase/ decrease the zone
number.