Kenwood NX- 1200A User Manual Download Page 41

Page: 41 / 85

Manual Site Hunt

[DMR]

Allows you can manually move the Revert Channel to another Channel without
waiting for Site Roaming to resume.

PF Button:

On the Channel of DMR Site Roaming, press the programmed button, the Manual
Site Hunt function operates.

• Beep A (1 beep) sounds.

Menu Mode:

Select “M SITE H” and press the

[ S ]

button, the Manual Site Hunt function

operates.

• Search Mode Tone sounds and send a Wake up message once to other

Channels registered in the same System set in DMR Site Roaming and go to

search for repeaters that can detect the synchronization signal.

• "SEARCH" is displayed during Manual Site Hunt operation.

Medium Transmit Power

[Analog/ NXDN/ DMR]

Turns Medium Transmit Power On or Off. When using a channel programmed with
low or high power, this allows you to change the output power to medium.

Menu Mode:

Select “MED PWR” and press the

[ S ]

button to change the Medium Transmit

Power On or Off.

Menu

[Analog/ NXDN/ DMR]

PF Button:

Press the programmed button to select and perform functions using the
transceiver Menu.

Summary of Contents for NX- 1200A






















































































Search results

Summary of Contents for NX- 1200A

Reviews:

Related manuals for NX- 1200A

Brands by name

Popular brands

Kenwood NX- 1200A, User Manual

Search results

Summary of Contents for NX- 1200A

Reviews:

Related manuals for NX- 1200A

Brands by name

Popular brands