Kenwood NX- 1200A, User Manual

Page: 23 / 85

23
Battery Status [Analog/ NXDN/ DMR]
Allows you to check the battery power status.
PF Button:
Press the programmed button, the Battery Status function operates.
Menu Mode:
Select “BAT STAT” and press the [ S ] button, the Battery Status function operates.
Battery status is represented by the number of times the LED indicator flashes
red. Four flashes represents full power, three represents medium power, two
represents low power, and one represents very low power. If the LED flashes red
only one time, recharge or replace your battery pack immediately.
Battery remaining LED Beep tone
Indicator
(LCD-Model)
Full Blink 4 times Sounds 4 times
Sufficient Blink 3 times Sounds 3 times
Low Blink 2 times Sounds 2 times
Very Low Blink 1 time Sounds 1 time
• When the Low Battery Warning function is active {p. 82 } and the battery
power is low or less, this button will not operate.
• If the Battery Level Tone has been enabled, a beep tone will sound according
to the number of flashes from the LED.
Broadcast [DMR]
Allows you to make a Broadcast Group Call. Broadcast Group Call can be used to
engage in one-way informative group voice calls by initiating a call to a group.
PF Button:
Press the programmed button, to switch to Broadcast Call.
Menu Mode:
Select “BCST” and press the
[ S ]
button to switch to Broadcast Call.
• “BCST ON” is displayed for 1 second and Broadcast Group Call will be On.