3 DMR function
28
Preventing Reception of a Group Call While the Transceiver Is Receiving an Individual Call (
Ignore Group Call
during Individual Call
)
Type
‘
■
Standard model
■
Basic model
Description
Ignore Group Call during Individual Call
is the function that prevents receipt of a Group Call if receiving an
Individual Call.
This function is used to prioritize the receipt of Individual Calls.
If this function is enabled, the transceiver cannot receive a Group Call (including data communications) while
receiving an Individual Call and the Auto Reset Timer is counting down.
Operating the transceiver
-
-
Note
Even if this function is enabled, the following Group Calls can be received.
A Group Call using All Group ID
A Group Call for Emergency
Configuration using FPU
Ignore Group Call during Individual Call
: Edit > DMR > General
Making an Informative Group Call (Broadcast Group Call) (
Broadcast Group Call
)
Type
‘
■
Standard model
■
Basic model
Description
Broadcast Group Call can be used to engage in one-way informative group voice calls by initiating a call to a
group.
The transceiver can initiate a call to the transceivers having the same Group ID by specifying the Group ID.
Operating the transceiver
Broadcast Group Call
Press the PF_BTN[Broadcast] or enter the Menu Mode by
pressing the PF_BTN[Menu], then turn on broadcast.
Transceiver behavior :
Tone A
sounds, display “BCST ON” for 1 sec and Broadcast
Group Call will be On.
Enter the Group Call Mode, select the ID to send from the
Group ID List.
Press [PTT].
Transceiver behavior:
Broadcast Group Call for the selected ID.
Note
This Function is DMR only.
Configuration using FPU
PF_BTN[Broadcast]
：
Edit > Button Assignment > Side, Front, Menu
PF_BTN[Menu]
：
Edit > Button Assignment > Side, Front, Menu
