5 ANALOG function
104
Using a Channel Being Used by Other Parties (
BCL Override
)
Type
‘
■
Standard model
■
Basic model
Description
The description of this feature is the same as the feature with the same name in the DMR function.
Operating the transceiver
-
-
Note
-
Configuration using FPU
-
Data Transmit with QT/DQT
Type
‘
■
Standard model
■
Basic model
Description
Data Transmit with QT/DQT
is a function for overlaying the QT tone or DQT code configured for the channel
during data transmission.
This function is available on the channels that send a Status Message or Short Message. It is also used during
data transmission using an external device.
When a QT tone or DQT code is used, such as on a repeater, enabling this function makes it possible to transmit
data by overlaying the QT tone or DQT code.
When audio and data transmission are carried out concurrently on the same channel, you can disable this
function to transmit data without overlaying the QT tone or DQT code to make the audio sound transmitted
inaudible during data transmission.
Operating the transceiver
-
-
Note
-
Configuration using FPU
Data Transmit with QT/DQT
: Edit > Optional Features > Optional Features 1 > Common 1
Stopping the scan temporarily during Priority Scan (
AC Control
)
Type
‘
■
Standard model
■
Basic model
Description
AC Control
is configured whether to stop the scan temporarily during a priority scan by just receiving a carrier
without having to decode QT/DQT even when QT/DQT is configured for a priority channel.
AC Control functions for a priority channel with "Analog" or "Mixed" configured in
Channel Type
.
AC Control
Configuration
Description
Enabled
Enables the capability to reset QT/DQT signaling and automatically detect a
carrier on a priority channel.
Disabled
Disables the capability to reset QT/DQT signaling and automatically detect a
carrier on a priority channel.
Operating the transceiver
-
-
Note
This function can be only used in an Analog Conventional system.
Configuration using FPU
AC Control
: Edit > Scan Information > Scan
Channel Type
: Edit > Zone Information > Channel Edit > General
Tones that Sound When a User Operates the Transceiver or When the Transceiver Status Is Changed (
Alert Tone
)
Type
‘
■
Standard model
■
Basic model
Description
Alert Tone
is configured whether the intermittently emitted Alert tone stops when the length of time configured in
Auto Reset Timer
elapses.
Operating the transceiver
-
-
Note
This function cannot be configured if "Off" is configured in
Auto Reset Timer
.
Configuration using FPU
Alert Tone
:
Edit > DTMF > Decode > Auto Reset
Edit > 2-tone > Decode (2-tone 1 to 4) > Auto Reset
Edit > FleetSync > General 2 > Auto Reset
Edit > MDC-1200 > General 1 > Auto Reset
Auto Reset Timer
: Edit > DTMF > Decode > Auto Reset
Configuring the Alert Tone Pattern (
Special Alert Tone
)
Type
‘
■
Standard model
■
Basic model
Description
The description of this feature is the same as the feature with the same name in the DMR function.
Operating the transceiver
-
-
Note
-
Configuration using FPU
-
