101
T
roubleshooting
Sound
All I hear is loud static when I play DTS discs.
•
Check that Digital has been set as the input mode. DTS discs do not
output analog sound. See “To Set Input Mode manually” on page 23.
•
DTS discs can only be played in Zone A
I hear a hum when I select the PHONO input.
Check that:
•
The audio cables are connected securely to the Phono jack set. See
Chapter One of the
Connections and Setup Guide
.
•
The turntable is grounded on the receiver. See Chapter One of the
Connections and Setup Guide
.
Sound is intermittent.
Attach the provided protective cap to the unused OPTICAL inputs. If the
light from a fluorescent lamp or direct sunlight enters through this con-
nector, the played audio will be intermittent.
I can’t hear any sound in Zone B.
Check that:
•
Multiple Zones is activated.
•
The volume in Zone B is turned up. See “How Do I Switch Control
Modes?” on page 91 of this manual.
•
The Zone B speakers are turned on if using Speaker B outputs for
Zone B (as opposed to Second Zone Pre Outs). See “Turning the Speak-
ers On” on page 10 of this manual.
•
The source is connected via an analog jack set (digital inputs are not
sent to Zone B). See Chapter One of the
Connections and Setup
Guide
.
