Kenwood KRF-X9995D User Manual Download Page 19

Page: 19 / 118

Using P

erT

ouch

How Do I Adjust the Sound?

Adjusting the Volume

Use one of the following methods to adjust the volume.

•

Turn the volume knob on the front panel of the receiver.

•

Press

DOWN

in the appropriate direction on PowerTouch.

Adjusting the Loudness (Only in STEREO mode with THX mode Off)

The Loudness control increases the bass and treble at low volume control
settings. This adjusts to the way the human ear hears sound at quiet vol-
umes, retaining music’s fullness and sparkle.

1. Touch

(Sound) on the Quick Access menu to open the Sound

menu.

If the opened menu is not the Sound menu, touch

2. Touch

to turn the loudness setting on or off.

3. Touch

to return to the previous menu or touch one of the Quick

Access menu buttons to proceed to the next operation.

Operation on the receiver:

1. Press the

SOUND

button inside the door repeatedly until

LOUD-

NESS OFF

is displayed.

2. Press the

MULTI CONTROL

(

ﬁ

) button to select

LOUDNESS ON

(or

OFF

), then press the

SOUND

button repeatedly until “

SOUND

FIXED

” is displayed.

Summary of Contents for KRF-X9995D























































































































Search results

Summary of Contents for KRF-X9995D

Reviews:

Related manuals for KRF-X9995D

Brands by name

Popular brands

Kenwood KRF-X9995D, User Manual

Search results

Summary of Contents for KRF-X9995D

Reviews:

Related manuals for KRF-X9995D

Brands by name

Popular brands