29
Using P
o
w
erT
ouch
How Do I Adjust the Surround Modes?
3. When you select
Dolby PL II: Music
, you can change the settings of
Panorama mode, Dimension and Center Width.
1)
Panorama
mode setting: Touch the
button to switch the
parameter on and off alternately.
2)
Dimension
setting: Touch the
button on the left of
to switch the setting to R-1, R-2 and R-3. Touch the
button on the right of
to switch it to F-1, F-2 and
F-3.
3)
Center Width
setting: Touch the
button on the left of
to decrease the expansion to the left and right. Touch
the
button on the right of
to increase it.
Description of Dolby Pro Logic II: Music Mode
Panorama mode
: Expands the image of front-channel stereo to the
surround speakers to create a sound environment that
fills your surroundings.
Dimension
: This controls the balance between the Front and Rear
in 3 steps on the front and 3 steps on the rear. Set this
parameter to one of the Front steps if the surround
effect is too strong, or to one of the Back steps if it is
too weak.
Center Width
: The center channel signal can be divided and distrib-
uted to the Front L/R channels.
The adjustment for distributing the center channel
signal to the front channels can be applied in eight
steps from 0 to 7.
Use this adjustment when the center image seems to
be too strong.
The Center Width parameter cannot be adjusted when
Center speaker is set to Off or No.
