English
|
29
Changing routes
It is possible to change the routes that have been searched. Select
on the MENU screen or the
whole route display screen, and the route-change screen will appear.
• Adding destinations (see page 29)
• Sorting destinations (see page 31)
• Clearing destinations (see page 32)
• Setting of passing roads (see page 33)
• Correcting of passing roads (see page 34)
• Canceling designation of passing roads (see page 35)
• Changing search conditions (see page 36)
Adding destinations
Additional destinations can be set after setting destinations. In the following cases, additional
destinations will be set.
- When setting passing points between the set destination and the current point.
- When changing the set destination to a passing point and setting a new destination.
1
Select
on the MENU screen or the Whole
Route screen.
The screen for changing routes will be displayed.
2
Select
of destinations and passing
destinations on the screen for changing routes.
3
Display the map including the points where
destinations will be set.
Refer to <Calling up maps> (see page 17).
4
Select
.
The destinations will appear at the position of
using
marks
.
<The screen for changing routes>
KNA-2600̲r3.0̲English.Indd 29
03.12.4, 10:29:56 PM