Kenwood HM-982RW Instruction Manual Download

Page: 85 / 88

In case of difficulty

Knowledge section

Preparation section

Application section

Basic section

Displayed message list

Common messages

Action

Meaning

Displayed Message

No disc is placed on the tray.

The loaded disc is not finalized.

The

TOC*

data cannot be read out.

Load a disc.

Load a finalized disc.

Play another disc.

No Disc

--:--

CD player messages

Action

Meaning

Displayed Message

No disc is placed on the tray.

The disc does not have enough re-
cordable space.

An attempt is made to record the
digital signal from a source the digital
copy of which is prohibited by SCMS.

The system is writing data on pro-
cessing, setting, etc.

Confirmation if "processing can be
executed".

An attempt is made to record a track
in high-speed recording within 74
minutes after the last high-speed re-
cording.

An attempt is made to record more
than 200 tracks in a CD in high-speed
recording within 74 minutes after the
high-speed recording.

The disc is not a CD-R/RW for music.

Load a disc.

Use a disc containing enough recording
space.

Record the analog input from the source.

This is a normal operation.

Press the

ENTER

key to execute the pro-

cessing.

Start high-speed recording after the dis-
played time has elapsed or record the CD
with normal-speed recording.

Use a music CD-R/RW.

No Disc

Disc Full

SCMS

Writing...

Ok? (blinking)

Wait xx min.

Sorry Buffer Over

Pro. Disc

CD recorder messages

The disc or input signal is incompat-
ible with this system.

The system is reading the TOC and
other disc data.

The auxiliary digital source is not con-
nected properly.

An attempt is made to perform high-
speed recording from a CD-RW.

This is a normal operation.

Connect properly referring to

“System con-

nection”

Use the normal-speed recording.

Not Audio

Reading...

Unlock

CD ReWritable Disc

Action

Meaning

Displayed Message

Common messages

* TOC ........ Any CD-R/RW contains the recording of TOC (Table Of Contents) data in addition to audio signals. The

TOC contains the non-rewritable data among that on the tracks, playing time and text data.

Continued on next page

Summary of Contents for HM-982RW

























































































Search results

Summary of Contents for HM-982RW

Reviews:

Related manuals for HM-982RW

Brands by name

Popular brands

Kenwood HM-982RW, Instruction Manual

Search results

Summary of Contents for HM-982RW

Reviews:

Related manuals for HM-982RW

Brands by name

Popular brands