Kenwood HM-982RW Instruction Manual Download

Page: 37 / 88

Recording on CD-R/RW

Knowledge section

Preparation section

Application section

Basic section

Make the preparations for recording.

The setting of the recording input can be changed as desired. See

"Changing the

recording input setting"

The input level can be varied only when the

"AUX"

(auxiliary analog source) input

is selected. Adjust the input level from the auxiliary source as required if it is too
small or too large. (

AUX Input

Rec Gain

)

TUNER (Broadcasts)

: Select a station

: Enter pause mode at the beginning of the

track to be recorded.

TAPE

: Enter stop mode at the beginning of the track

to be recorded.

AUX (Auxiliary analog source)

: Make preparation for tuning or playback.

D-AUX (Auxiliary digital source)

: Make preparation for tuning or playback.

TUNER (Broadcasts) : Press the TUNER/BAND key
CD

: Press the CD

key

TAPE

: Press the TAPE

key

AUX (Auxiliary analog source)

: Press the AUX/D-AUX key repeatedly until "AUX"

is displayed.

D-AUX (Auxiliary digital source)

: Press the AUX/D-AUX key repeatedly until "D-

AUX" is displayed.

When

TAPE

is pressed, playback

will start when a disc or tape already has been
inserted. Press the

STOP

key to stop it.

Digital signal recording is not available unless the
selected source is

"CD"

"D-AUX"

. Note that,

even with these sources, digital signal recording
may be prohibited by the SCMS.

"Unlock"

is displayed when the

"D-AUX"

source is selected, please see

"Displayed mes-

sage list"

2. Select the source to be recorded.

When CD has been selected.

SINGLE

C D 0 1

0 : 0 0

The selected recording
source is displayed.

When recording audio from a tape to CD-R/RW, track numbers may not
be marked correctly depending on the recording condition of the tape.
"Changing the recording input setting".

OPC (Optimum Power Control)

When a non-used disc or unfinalized disc is loaded in the CD recorder, the

CD-R IN

indicator may blink for a while. This indicates that the

OPC

processing is being executed.

The

OPC

processing performs test writing in the disc in order to calculate the optimum laser irradiation intensity and time for the disc.

With this system, the CD recorder stores the discs subjected to

OPC

processing so that, when one of such discs is loaded, it can record

signals on it without

OPC

processing. The CD recorder stores the history of

OPC

processing of up to 24 discs. As a result, if the number

of processed discs exceed 24, the CD recorder may apply

OPC

processing to a disc which has been subjected to it. If the power cord is

unplugged from the power outlet or a power failure occurs during

OPC

processing, the disc data may be destroyed and the disc may become

unusable.
When the

"CDR"

input is selected,

"OPC"

is displayed (for up to 2 minutes) during

OPC

processing.

Continued on next page

Summary of Contents for HM-982RW

























































































Search results

Summary of Contents for HM-982RW

Reviews:

Related manuals for HM-982RW

Brands by name

Popular brands

Kenwood HM-982RW, Instruction Manual

Search results

Summary of Contents for HM-982RW

Reviews:

Related manuals for HM-982RW

Brands by name

Popular brands