61
Knowledge section
Preparation section
Application section
Basic section
Convenient recording of CD player output
Start recording.
4
To interrupt a recording
Press the
7
(stop) key on the main unit or
7
STOP
key on the remote. (This stops both recording and
playback.)
CD
=
CDR
÷
When either the
CD
playback or
CDR
recording operation
stops, the other operation also stops.
÷
When you are operating the main unit, select
"O.T.E. Mode"
in the menu mode, then select
"CD
=
=
=
=
=
CDR <Norm>"
and
press the
SET
key to start recording.
÷
"CDR Writing"
is displayed when recording completes.
÷
With certain discs, digital-to-digital recording may be prohib-
ited by SCMS (
A
). Such a disc should be recorded using
the analog output signal.
e
To finalize the recorded CD-R/RW
∏
Display "CDR Writing" indicates that recorded data is
being written in the CD-R/RW. Do not apply vibra-
tions or impact during recording and "CDR Writing"
display.
If the power cord is unplugged from the power outlet
or a power failure occurs during recording, the disc
data may be destroyed and the disc may become
unusable.
During digital-to-digital recording, the CD recorder
may encounter a track with which digital-to-digital
recording is prohibited. In this case, "SCMS"(
A
) is
displayed and recording pauses temporarily, but play-
back of the source continues and recording restarts
whenever a track with which digital-to-digital record-
ing is permitted is encountered. However, if "SCMS"
is displayed with the first track to be recorded, the
track as well as the subsequent tracks will not be
recorded.
