TK-5810
(
BG
)
/5810H
(
BG
)
5
REALIGNMENT
1. Modes
User mode
Panel test mode
Firmware version information
Panel tuning mode
Data programming mode
PC test mode
PC tuning mode
PC mode
Firmware
programming mode
Clock adjustment mode
Self programming mode
Transceiver information mode
Clone mode
Mode
Function
User mode
For normal use.
Panel test mode
Used by the dealer to check the fundamen-
tal characteristics.
Panel tuning mode
Used by the dealer to tune the transceiver.
PC mode
Used for communication between the
transceiver and PC.
Data programming
mode
Used to read and write frequency data and
other features to and from the transceiver.
PC test mode
Used to check the transceiver using the
PC. This feature is included in the FPU.
See panel tuning.
Firmware
programming mode
Used when changing the main program of
the fl ash memory.
Firmware version
information
Used to confi rm the internal fi rmware ver-
sion.
Clock adjustment
mode
Used by the dealer to adjust date and time.
Transceiver
information mode
Used to confi rm the transceiver fi rmware
version.
Clone mode
Used to transfer programming data from
one transceiver to another.
Self programming
mode
Frequency, signaling and features write to
the transceiver.
2. How to Enter Each Mode
Mode
Operation
User mode
Power ON
Panel test mode
[PF1] + Power ON
PC mode
Received commands from PC
Panel tuning mode
[Panel test mode] + [GRP
]
Firmware programming mode
[PF2] + Power ON
Firmware version information
[PF3] + Power ON
Clock adjustment mode
[PF4] + Power ON
Transceiver information mode
[PF1] + [PF3] + Power ON
Clone mode
[PF5] + Power ON
Self programming mode
[GRP
] + Power ON
3. Panel Test Mode
Setting method refer to ADJUSTMENT.
4. Panel Tuning Mode
Setting method refer to ADJUSTMENT.
5. PC Mode
5-1. Preface
The transceiver is programmed by using a personal com-
puter, programming interface (KPG-43/43A), USB adapter
(KCT-53U) and programming software (KPG-95DG: ver. 6.10
or later).
The programming software can be used with a PC. Fig-
ure 1 shows the setup of a PC for programming.
PC
KPG-43 or KPG-43A or
KPG-43A + KCT-53U
Illustration is KPG-43.
KPG-95DG
PC
KPG-43
Transceiver
D-SUB
(25-pin)
PC
KPG-43A
PC
KPG-43A
KCT-53U
Transceiver
Transceiver
D-SUB
(9-pin)
USB
(Ver. 6.10 or later)
Fig. 1