TK-5810
(
BG
)
/5810H
(
BG
)
22
DISASSEMBLY FOR REPAIR
Disassembly Procedure (TK-5810(BG)/5810H(BG))
■
Removing the Control unit (X53-440)
1. Remove the 7 screws
q
.
2. Remove the shielding plate
w
.
3. With a fl at-head screwdriver, remove the 2 fl at springs
holding the ICs (IC5 and IC522)
e
.
4. Remove the fl at cable from the connector (CN501)
r
.
5. Remove the cables from the two connectors (CN459 and
CN502)
t
.
■
Removing the accessory cable and power sup-
ply cable on the rear of the transceiver
1. Confi rm the following contents.
• The screws holding the + (positive) terminal and –
(negative) terminal of the power supply cable is re-
moved.
• The cable from the connector (CN502) of the Control
unit is removed.
2. Remove the 4 screws
y
holding the shielding plate,
and remove the shielding plate
u
from the chassis (TK-
5810H(BG) only).
3. Remove the 4 screws
i
on the rear of the transceiver.
4. Pull out the power supply cable and accessory cable.
:
:
:
:
@
=
=
;
.
B
B >
2
2
CN459
CN502
Flat
spring
IC
CN501
Precautions for Reassembly
■
Painting the lubricant (Part No.: 410-0019-05) on
the groove of the case packing
Paint the lubricant to the position as shown in fi gure af-
ter replacing or assembling the case packing.
Note:
To assure waterproofing, paint the lubricant on the
groove of the case packing.
• Case packing (Upper)
Paint the lubricant (Part No.410-0019-05)
on the groove of the case packing.
lubricant
lubricant
OK
NG
case packing
groove of the
case packing
TK-5810
TK-5810H
• Case packing (Lower)
lubricant
OK
NG
groove of the
case packing
Paint the lubricant (Part No.410-0019-05)
on the groove of the case packing.
lubricant
case packing
TK-5810
TK-5810H
