ENGLISH
27
Radio
Listening to the radio
❏
Indications and buttons on the source
control screen
9 p q
2
4
5
3
8
1
7
6
Radio reception information
1
Preset no.
2
Current band
3
Frequency/PS name
4
Seek mode (See the right column.)
5
Preset list (Page 28)
6
Standby reception indicators (Page 29)
7
AF indicator (Page 30)
8
LO.S indicator (Page 28)
9
ST/MONO indicator: Lights up when receiving
an FM stereo broadcast with sufficient signal
strength.
p
RDS indicator: Lights up when receiving a Radio
Data System station.
q
EON indicator: Lights up when a Radio Data
System station is sending EON signals.
Operation buttons
[AUTO1]/
[AUTO2]/
[MANUAL]
Changes the seek mode. Each time
you touch the button, the seek mode
changes as follows:
• AUTO1: Auto search
• AUTO2: Tunes in stations in the
memory one after another.
• MANUAL: Manual search
[FM]
Selects the FM band (FM1 – FM3).
[AM]
Selects the AM band.
[TI]*
Activates/deactivates TI standby
reception mode. (Page 29)
[MONO]
Activates/deactivates monaural mode
for better FM reception. (Stereo effect
will be lost.)
• The MONO indicator lights up while
monaural mode is activated.
[PTY]*
Enters PTY search mode. (Page 29)
[
]
Mutes the sound.
• To restore the sound, touch the
button again, or adjust the volume.
[
S
] [
T
] Searches for a station.
• The search method differs
according to the selected seek
mode. (See above.)
[AME]
Presets stations automatically.
(Page 28)
[
]
Changes the settings for radio
reception on the <Radio SETUP>
screen. (Pages 27 – 30)
*
Appears only when FM is selected as the band.
❏
Setting the antenna control
You can store the antenna automatically when the
source is changed from the tuner to another source.
• The antenna is extended regardless of the setting
when the source is the tuner.
1
Display the <Radio SETUP> screen.
2
[ON] Select this to keep the antenna
extended even when the source is not
the tuner.
[OFF] Select this to store the antenna
automatically.
