Kensington HB-NTQ, Instruction Manual

Page: 10 / 16

10
0800 422 274
NZ
Instructions (Cont.)
Manual heating mode (MANUAL)
In MANUAL mode, you can select heating of each
zone.
• Press the HEAT button: the top half of the body
figure and the heat setting for that zone will
flash.
• Use the [ + ] or [ - ] buttons to set the desired
heat level for that zone.
• Press the HEAT button again: the bottom half
of the body figure and the heat setting for that
zone will flash.
• Use the [ + ] or [ - ] buttons to set the desired
heat level for that zone.
• Press the HEAT button and both settings will
stop flashing, the heat button will illuminate and
heating will start.
NOTE: On the Manual setting, the blanket will
switch off automatically after a maximum time of
12 hours.
The BOOST button
The BOOST button is ideal for preheating the bed. It
will work when the controller
is set to MANUAL or
AUTO mode. When the BOOST button is activated,
the letter [ H ] will be displayed on the screen and
the BOOST button will illuminate.
• Press the BOOST button to start preheating: the
blanket will heat for a maximum of 20 minutes
and then return to the settings for each zone.
• To stop heating at any time, move the power
switch to the OFF position.
NOTE: The BOOST button can be used at any time
when the blanket is heating.