background image

5

0800 422 274 

NZ

•  Arranging the blanket

*  Arrange the blanket so that the heating wires are not beneath pillows and/

or bolsters.

*  Ensure the heating wires are trapped or tucked into any part of the bed.
*  Make sure that the heating area (wire element) on any side of the bed does 

not hang over the edge of the mattress. 

*  Ensure the electric blanket is stretched completely flat when placed on the 

mattress, without creasing and rucking. 

*  The power cord and controllers must be kept outside the bed, if possible.

•  Avoid overheating: The blanket must be placed completely flat during use to 

prevent overheating. Do not use the blanket in a folded or crinkled state and 
check frequently to ensure that this condition is being maintained. 

•  During use: Make sure nothing is heavy is placed on the blanket while it is 

switched on. Do not fold back heavy bed clothes, do not leave heavy objects 
on the bed when the blanket is switched on. The blanket must be kept in the 
fully spread condition at all times during use to avoid overheating.

•  No extended use: Avoid extended use of this product at the highest setting 

as a build-up of heat could cause overheating of the body (heat stroke), 
irritations or burns on the skin. Do not leave the electric blanket in contact 
with skin for excessive periods of time.

•  Cleaning: Only clean this blanket according to the instructions in this manual.
•  Do not dry-clean: Cleaning liquids may have a harmful effect on the 

insulation or covering of the heating unit. If soiling occurs, follow the 
instructions in this manual for washing the blanket or removing stains. 

•  Storage: The blanket must have cooled down before storage. Fold it neatly 

but not tightly (or roll) in the original packaging without sharp bends in the 
heating element and store where no other objects will be placed upon it. Avoid 
pressing creases into the blanket. Always store the blanket indoors.

•  Damage: Check the product regularly for damage to the blanket, controllers 

or cord. In case of damage, do not use the product. Disconnect it from the 
mains power supply and phone the after sales support line for advice. 

•  Service: There are no user serviceable parts inside. It is recommended that an 

appropriately qualified person inspect your blanket after each 3 years of use.

General Safety Instructions (Cont.)

Summary of Contents for HB-NTQ

















Reviews: