13
0800 422 274
NZ
Other Useful Information
Cleaning the electric blanket
This electric blanket has waterproof heating elements, making it safe for immersion
in water and hand or machine washing.
Just make sure you always unplug
the controllers from the power supply and detach them before exposing the
blanket to water.
To remove the controllers, push out the locking clip to release
the socket pin and withdraw the connector plug by pulling it away from the socket.
Do not dry clean. Do not iron.
Spot-cleaning
• Set the control to the OFF position and remove the plug from the wall outlet.
• Remove stains on the blanket with a damp sponge, moistened with a mild
detergent solution and lukewarm water. Follow this with sponging using clean
water.
• Remove any excess water by compressing the wet area between absorbent
towels.
Handwashing
• Set the control to the OFF position and remove the plug from the wall outlet.
• Detach the controllers, as described above.
Do not let the controllers come
into contact with water!
• Immerse the blanket in lukewarm water with a detergent for fine fabrics and
allow the blanket to soak for 5 minutes. Remove from the solution and gently
squeeze the solution through the blanket.
• Rinse well in clean, lukewarm water. Gently squeeze and drain the excess
water from the blanket.
• WARNING:
Do not wring the blanket, as this may damage the wiring!
Press the water out of the blanket using a flat hand.
• Dry the blanket as described on page 14.
WARNING!
• Always remove the controllers before washing the blanket! Never immerse
the controllers in water or any other liquid.
• Do not have the blanket chemically dry-cleaned.
• Do not bleach the blanket; do not iron it and do not dry it in the tumble dryer.
Summary of Contents for HB-NTQ
Page 1: ...MODEL NUMBER HB NTQ N13275...
