background image

5

0800 422 274 

NZ

• 

Usage restriction: This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, or lack of experi-

ence and knowledge, unless they have been given supervision or instruction con-

cerning use of the appliance by a person responsible for their safety. 

• 

Children: Supervise children to ensure they do not play with the heater. Close su-

pervision is necessary when any appliance is used by or near children. 

•  CAUTION: Hot! 

Accessible parts of this heater can become very hot when in 

use. To avoid burns, do not let bare skin touch hot surfaces. Be particularly 

careful when children and vulnerable persons are present. Always let the heater 

cool down before touching it, even if it is unplugged from the power supply.

• 

To ensure personal safety, do NOT install or use this heater: 

•  In front of or immediately below a socket outlet.

•  Close to a radiant heat source.

•  Behind a door. 

•  On long pile carpet or a flokati rug.

•  Near a window where it may get splashed with rain.

•  Near flammable materials or surfaces (such as furniture, curtains, pillows, 

bedding, papers, clothes), or near open flames. Keep flammable materials at 

least 1m away from the front, sides and rear of the heater. 

•  In an area where petrol, paint or other flammable liquids are stored, e.g. a garage or 

workshop, as the heater has hot and arcing parts inside which may spark.

• 

Bathroom usage: If this heater is used wall-mounted in a bathroom, it must be 

installed at a safe distance from the bath or shower. The heater must be installed 

so that a person in the bath or shower is unable to touch the control. Any power 

outlet in a bathroom must be located 3m from a bath or shower. 

• 

Ingress protection: This heater has a ingress protection rating of IP24, which 

means it is protected against ingress of solid objects up to 12mm (e.g., fingers), 

and against water sprays from all directions. 

• 

Service: This heater contains no user-serviceable parts inside. Do not attempt to 

open and repair the heater yourself. Components should only be serviced by a 

qualified technician. 

• 

Malfunction: In case of malfunction, disconnect the plug immediately and 

contact our after sales support line for advice.

• 

Storage: To avoid damaging the heater during storage or transport, keep the 

heater in a dry place, free from excessive vibration.

• 

Improper use: Improper use or installation may result in the risk of fire, electric 

shock and/or injury. We assume no liability for any eventual damages caused by 

improper use or incorrect handling. 

DANGER! Do not cover

 the heater in any manner as it may 

overheat and become a fire risk. 

General Safety Instructions (Cont.)

Summary of Contents for CH-07D

















Reviews: