![background image](http://html1.mh-extra.com/html/kensington/ch-07d/ch-07d_instruction-manual_664244009.webp)
9
0800 422 274
NZ
Castor Wheel Assembly (for freestanding use)
Before using the heater as a freestanding unit, you must attach the two castor
wheels assemblies so the heater can safely stand in an upright position.
• To install the castor wheel assemblies, put the heater upside down on a soft, flat
surface.
• Locate the screw holes at each end of the underside of the heater.
• Place a mounting plate over the screw holes and affix with 4 of the 8 screws
from the assembly hardware bag.
• Affix one castor wheel at each side of the mounting plate, using the castor
mounting bolts to secure.
• Affix the other castor wheel assembly the same way on the opposite side, en-
suring both wheel assemblies are securely attached.
• Your heater is now ready for freestanding use.
Getting Started (Cont.)
WARNING!
Do not connect the heater to the power supply until it is securely mounted to the
wall or until the stands are securely fitted.
Summary of Contents for CH-07D
Page 1: ...MODEL NUMBER CH 07D N13275...