background image

4

0800 422 274 

NZ

• 

After use: Always disconnect power when the heater is not in use and before 

cleaning, servicing or moving the heater. To disconnect the heater, switch it off and 

remove the plug from outlet. When disconnecting, grip the plug, do not pull on the 

cord. 

• 

Safety switch: Unless your home is already fitted with a residual current device 

(safety switch), we recommend installing an RCD with a rated residual operating 

current not exceeding 30mA to provide additional safety protection when using 
electrical appliances. See your electrician for professional advice.

Usage Conditions and Restrictions

• 

Indoor domestic use only: This appliance is intended for domestic use only. It is 

not suitable for heavy duty commercial or trade use. Do not use it outdoors, on wet 

surfaces or near a swimming pool.

• 

Space heating only: Do not use this appliance for anything other than its intended 

purpose, and only use it as described in this manual. Any other use is not recom-

mended and may cause fire, electric shock or injury. Do not use this appliance as a 

drying rack for clothing. Do not use the heater to dry or heat shoes, pipes or any 

other item.

• 

Accessories: The use of accessory attachments not recommended by the 

appliance distributor may result in fire, electric shock or personal injury.

• 

Ventilation: Only use this heater in a well ventilated area. 

• 

Wall-mounting: To prevent a possible fire, do not block the space between the 

heater and the wall, if wall-mounting the heater. This space is required for air 

intake or exhaust. Only install the heater on an appropriate, sturdy wall that can 

support the weight of the heater.

• 

Covers: The appliance housing is intended to prevent direct access to the heating 

elements and must be in place when the appliance is in use.

• 

Keep openings clear: To prevent a possible fire, do not insert or allow objects to 

enter any ventilation or exhaust openings. Keep airflow grilles free of dust and hair 

build-up, especially if you have indoor pets. Do not block air intakes or exhaust 

openings in any manner. Keep a free space of at least 1m at the front, sides and 

rear of the appliance.

• 

WARNING: No external timer! 

Never operate the heater on a program switch, 

separate timer switch or any other appliance for automatic operation, as there is a 

risk of fire if the heater is covered or positioned incorrectly. In order to avoid a haz-

ard due to inadvertent resetting of the thermal cut-out, do not connect it to a circuit 

that is regularly switched on and off by the utility.

• 

WARNING: Protect from water: 

Do not use this heater in the immediate surround-

ings of a bath, shower or swimming pool. Never locate the heater where it may fall 

into a bathtub or otherwise become immersed in water.

• 

Unattended: Do not leave the appliance unattended while it is in use.

General Safety Instructions (Cont.)

Summary of Contents for CH-07D

















Reviews: