Motor Protector
This vacuum
cleaner has a
motor protector
by-pass valve
which prevents
motor overheating
and damage. The
valve opens to
provide cooling
air when a clog
prevents normal
air flow to the
vacuum cleaner
suction motor. You
will notice a
change of sound as air rushes through
the valve opening.
To correct problem, install a new dust
bag. If using attachments, adjust to allow
for greater air flow.
NOTE:
The motor protector may open
when using attachments or when cleaning
new carpet due to reduced airflow caused
by the attachments themselves or by new
carpet lint filling the dust bag quickly.
Note:
Do not block motor protector.
MOTOR PROTECTION SYSTEM
Thermal Protector - Suction Motor
This vacuum cleaner has a thermal
protector which automatically trips to
protect the vacuum cleaner suction
motor. If a clog prevents the normal flow
of air to the motor, the thermal protector
turns the motor off automatically. This
allows the motor to cool in order to
prevent possible damage to the vacuum
cleaner.
Thermal Protector - Agitator Motor
This vacuum cleaner has a thermal
protector which automatically trips to
protect the agitator motor. The thermal
protector turns the motor off
automatically. This allows the motor to
cool in order to prevent possible damage
to the vacuum cleaner.
To reset thermal protector:
Turn the
vacuum cleaner off and unplug the
power cord from the outlet to allow the
vacuum cleaner to cool and the thermal
protector to reset.
Check for and remove clogs, and replace
bag if necessary. See CLOG REMOVAL
section. Also check and replace any
clogged filters. Wait approximately 30-
50 minutes before restarting vacuum
cleaner.
Motor
Protector
PERFORMANCE/SAFETY FEATURES
CAUTION
Always return the vaccum cleaner to the
upright position before using the hose
and attachments. Failure to do so may
result in overheating of the agitator
motor and can cause the thermal
protectors to trip.
Cordon
d’ alimentation
Poignée de
transport
Corchet supérieur
à relâche rapide
du cordon
CORDON D'ALIMENTATION
1.
S'assurer que le crochet de rangement
du cordon se trouve à la position
redressée de la manière indiquée.
2.
Enrouler sans serrer le cordon
d'alimentation autour du crochet de
rangement du cordon et de la poignée
de transport.
3.
Bloquer la fiche du cordon
d'alimentation sur le cordon
d'alimentation.
AVERTISSEMENT
Risque de chocs électriques ou de
blessures corporelles
Le fait d'enrouler le cordon trop serré le
soumet à des tensions qui pourraient
l'endommager. Un cordon endommagé
est source de chocs électriques et peut
causer des blessures corporelles ou des
dommages.
ENGLISH
15
8
