Mechanical installation
Kendrion INTORQ | BA 14.0224 | 02/2021
25
¾
The connecting cable must be routed in such a way that the minimum bending radii are
maintained under all operating conditions (for the minimum bending radii, refer to Minimum
bending radius for the brake connection cable, Page 32).
Mounting the brake on the flange side
A
B
C
D
Fig. 8:
Mounting the brake (on the flange side)
A
Fastening screw
B
Spring-applied brake
C
End shield
D
Hub
1. Push the spring-applied brake on the hub.
2. Screw the spring-applied brake to the end shield using the built-in fastening screws. Use a torque
wrench (refer to the Mounting data, Page 14 table for the tightening torques).
