KEMPER MiniFil Operating manual -
EN
- 63 -
Technical modifications and errors expected.
Disassembly work must be done with great care, so that dust adhering to the MiniFil
is not stirred and no injuries can be caused to anyone performing this task.
Therefore, for dismantling use a well-ventilated room with filtered air or a suitable
mobile filter unit. The working area should be separated/identified. Swirled up dust
must be immediately cleaned up with a vacuum cleaner for dust class "H".
During the job, personal protective equipment such as protective clothing, gloves,
powered air respirator system etc. is to be worn to prevent exposure to hazardous
dusts.
Before you start dismantling, the unit must be cleaned and all dust still on andinside
the unit is to be removed. Please use an industrial vacuum cleaner of dust class “H”
for this purpose.
At the start of the dismantling process the filters used are to be removed and
disposed of in a sealed plastic bag. Then the unit is disassembled and any dust that
is released is vacuumed up again every time. The parts can then be disposed of by
an authorized company after being sorted by material type.
Finally, the working area must be cleaned.
