KEMPER MiniFil Operating manual -
EN
- 38 -
Technical modifications and errors expected.
1 General Remarks
1.1 Introduction
These Operating Instructions are a necessary and essential aid for the correct and
safe operation of the KEMPER MiniFil welding fume filter unit, hereinafter referred to
as the MiniFil.
The operating instructions contain important information for operating the MiniFil
safely, properly and efficiently. Following the instructions helps to avoid danger,
reduce repair costs and downtime and increase the MiniFil's reliability and service
life. The operating instructions must therefore always be at hand and should be read
by every person before working on or with the MiniFil and the information and advice
provided in it is to be observed and applied.
Work on and with the MiniFil includes in particular:
−
transport and
−
normal use and operation of the unit in the works,
−
maintenance (care, servicing, filter change, fault clearance)
−
final disposal
1.2 Notes on Copyrights
These Operating Instructions should be kept confidential. They should be made
accessible only to authorized persons. It may only be handed over to third parties
with the consent of KEMPER GmbH.
All documents are protected under the Copyright Act. The reproduction and
distribution of documents, including excerpts, as well as re-use and passing on their
contents is not permitted unless this is expressly permitted in writing.
Violations are liable to prosecution and liable for damages. We reserve the rights to
exercise all intellectual property KEMPER GmbH rights.
