- 26 -
3.1.18 Fault message / error log
To view the fault messages or error log, go to the "Log" tab, press the right mouse button
on the corresponding log and select "Save as".
The CSV file that this downloads can be opened with conventional spreadsheet programs
such as Excel or OpenOffice.
3.2 Temperature monitoring
The KHS temperature monitor for drinking water is used to monitor all major temperatures in the drinking
water system. A maximum of 100 sensors can be stored in the configuration. While doing so, set point values
are stored for each temperature sensor.
To go to the temperature monitoring, you have to select the "Recording" tab. With the monitoring function you
can add drinking water temperature-sensors and record the temperatures in the temperature log at defined
monitoring times.
