- 19 -
As you can see in the symbolic representation in the sample project, there is only one C-valve.
In this case, Channel 5 (105) has C-valve 1, is linked with Overflow sensor 2 and is triggered by time control.
You also have a facility for editing the comments and the names as you desire. Subsequently confirm the
changes with "OK". To add more C-valves, proceed likewise.
3.1.7 Configuring flow rate sensors
As shown in the sample project, in total one volume flow sensor should be added.
To be able to configure it, select the "Volume flow sensor" navigation point and click on the
corresponding sensor on "Edit".
Now set the corresponding measurement range of the sensor (see label on the sensor) and
assign it to the corresponding channel. In this case we only have one volume flow sensor on
Channel 1 (101). You also have a facility for editing the comments and the names as you desire.
Confirm the changes by pressing "OK". Proceed likewise for additional sensors.
