Kellfri 21-SV500E, Manual

Page: 3 / 36

3
Table of contents
INTRODUCTION
Thank you for choosing a product from Kellfri AB. By following general safety information,
operating instructions and common sense, you will have many years of enjoyable use of the
product. Kellfris equipment and products are aimed to be use by active farmers with high
demands on functionality.
PRODUCT INFORMATION
Versatile band saw with bed sections
Electric-powered sawmill with bed sections that are simple to put together for the required
length of timber. The timber is held in place with a clamp.
Water-cooled band saw blade for long service life and with roller blade guides, service-friendly
with protected construction. Powerful electric motor with power transmission via belt, quiet
and eco-friendly operation.
Make the bed completely level, adjusting with the adjustable feet, to give you a band saw with
high dimensional accuracy and capacity to saw high-grade construction timber as required.
Millimetre adjustment of timber thickness.
Maximum cutting dimensions:
Max timber diameter: 50,8cm (20”)
Max width of the plank: 50,8cm (20”)
Max thickness of the plank: 11,43cm (4,5”)
Max cutting length: 280cm (without extension)
The machine is only designed for cutting timber into planks
TECHNICAL SPECIFICATION 21-SV500E
Nett weight: 314 kg
Sawmill L x W x H: 3970 x 1800 x 1570 mm
Saw blade:
Saw blade length:
Saw blade height:
Saw blade thickness:
TPI: (Tooth per inch)
Saw blade speed:
3760 mm
32 mm
0,9 mm
1,1
2800 rpm
Width of the rail 560 mm
Max cutting thickness 140 mm
Maximum length of the plank: 280 cm (without extension)
Motor Power 8 Kw/380V
TABLE OF CONTENTS
Introduction 3
Product information 3
Technical specification 3
Safety information 4
Product safety information 5
Incase of emergencies 5
Warning labels 6
Symbol 6
Personal protection 7
Before use 7
Use 8
Starting the engine 8
After use 10
Transport and storing 10
Maintenance and service 10
Inspection of belt 11
Troubleshooting 12
Troubleshooting 13
Assembly - sawmill 21-SV500E 14
Assembly - feet and frame 15
Assembly - cutting head unit and winch 16
Assembly - measurement scale and water tank 17
Assembly - rails 18
Stabilizers - log support 18
Assembly - log support 19
Assembly - rail feet 20
Installing the saw blade and belt adjustments 21-23
Adjustment: up and down 24-25
Drawing i: cutter head frame 26
Drawing iii: feet of cutter unit 27
Drawing ii: height adjuster 27
Rawing iv: cutting head unit 28
Rawing v: sawband 29
Drawing vi: rail 30
Pos.no and description 31
Wiring diagram 34
Complaint form 35
Ec-declaration of conformity, original 36