21
INSTALLING THE SAW BLADE AND BELT ADJUSTMENTS
The following instruction should never be perform with the engine running. For your own
safety, pull out the electric cord from the socket. Gloves and goggles are recommended to
worn when working with the saw belt.
1.) Remove the belt cover by removing 3 bolts mounted on the front, use 13 mm wrench.
2.) Loosen hexagon bolts on the saw belt’s band guide on both side of the cutting head unit
(Figure 1). Release upper and lower mounting bolts and release tensioner (Figure 2). Move the
tensioner forward for easier assembly of the belt.
tensioner
FIG.1
FIG 3
FIG 4
FIG. 2
upper mounting bolt
lower mounting bolt
Summary of Contents for 21-SV500E
Page 26: ...26 Table of contents DRAWING I CUTTER HEAD FRAME...
Page 27: ...27 Table of contents DRAWING II HEIGHT ADJUSTER DRAWING III FEET OF CUTTER UNIT...
Page 28: ...28 Table of contents RAWING IV CUTTING HEAD UNIT...
Page 29: ...29 Table of contents RAWING V SAWBAND...
