- 20-
screw.
E. Mount emitter and receiver in the assembling slot of upper and lower vibration-reducer of steel
pipe, properly tighten the M5×25 inner hexagon screw on LCS pipe-mounting fixing clamp.
F.
Adjust the installation position of emitter and receiver (including the safety distance, protection
height and horizontal corner) to make them parallel and aligned.
G. After commissioning, fasten all screws.
①
Emitter/ Receiver
②
LCS vibration-reducer
③
LCS pipe-mounting fixing clamp
④
M4×20 cross recessed screw,
Φ
4 elastic/plain
washer
⑤
M5 square nut washer
⑥
M5×25 inner hexagon screw,
Φ
5 elastic washer
⑦
Steel pipe
⑧
M16×45 hexagon screw,
Φ
16 elastic/plain
washer
⑨
Bracket arm
⑩
Bracket seat
!
M8×20 inner hexagon screw,
Φ
8 elastic washer
@
M8×20 inner hexagon screw,
Φ
8 elastic washer
Fig.3.2.4
Pipe mounting installation (GZ)
