- 17-
E. Adjust the position of emitter and receiver to make them parallel and aligned and tighten the
installation screws properly.
F.
After commissioning, fasten all mounting screws.
3.2.2
Common side mounting (PC)
It refers to the installation mode that the emitter and receiver are directly installed on the machine
body with the ordinary mounting bracket. It is generally applicable to the closed pressure machine
with framed structure. Installing form as shown in Fig.3.2.2 The installation steps are as follows:
1
M4×8 cross recessed screw,
Φ
4 elastic/plain washer
②
M5×16 inner hexagon screw,
Φ
5 elastic/plain washer
③
LCS vibration-mounting bracket
④
LCS vibration-reducer
⑤
Emitter/ Receiver
Fig.3.2.2
Common mounting (PC)
