![background image](http://html1.mh-extra.com/html/keithley/2750/2750_user-manual_3956564256.webp)
Model 2750 Multimeter/Switch System User’s Manual
Triggering
8-13
What happens next depends on the state of initiation. If continuous initiation is already
enabled, the instrument will leave the idle state. SYSTem:PRESet enables continuous ini-
tiation. Therefore, operation will immediately leave the idle state when it is sent. The
*RCL command will do the same if INITiation:CONTinuous ON is a user saved default.
*RST disables continuous initiation. Therefore, the instrument will remain in the idle
state.
Either of the following two initiate commands will take the instrument out of the idle state:
•
INITiate
•
INITiate:CONTinuous ON
NOTE
While in remote, pressing the LOCAL key restores continuous front panel
operation.
2750-900-01.book Page 13 Wednesday, August 3, 2011 7:56 AM
Summary of Contents for 2750
