29
DOC06820 Rev. A
SERVICE / REPAIR MANUAL
RUNNING FLOOR II
®
DX
6.
Loosen both ends of the elbow fittings that are attached to the CYL ports and turn the ends away from
the switching valve.
7.
Plug the loose ends of the fittings to keep them
clean and from leaking fluid.
8. Loosen the ends of the tubes connected to the
PUMP & RES ports.
9.
Support the switching valve (14 lbs [6.35 kg])
and only remove the (3) bolts securing the
switching valve to the drive frame bracket and
then remove the switching valve.
