![background image](http://html1.mh-extra.com/html/keiser/m-series/m-series_manual_3920676008.webp)
-6-
KEISER M SERIES BIKE PEDAL
As indoor group cycling grew in popularity and the demands on bikes increased, the need for a more
user-friendly, yet more durable commercial-grade pedal became clear. For these reasons, Keiser
introduced and currently uses the M Series Bike Pedal.
PEDAL STRAP
The strap on the Keiser M Series Bike Pedal helps to create a
snug fit for the rider’s foot once the foot is placed correctly on
the pedal and in the cage. To tighten the strap, ensure that the
strap is not threaded through the second cutout. Pull up on the
strap to create a snug fit. Once a desired tightness is achieved,
the strap can then be re-threaded through the second cutout.
To release, lift up on the clip.
The cage is integrated
into the design of the
pedal, not just added on
Curvature of the pedal
matches typical shoe design,
eliminating pressure points
on the rider’s foot
Stronger bearings tested
for static and dynamic loads
experienced when rider gets
on and off, and during rides
Pronounced edge allows
rider to easily flip pedal
and insert foot
Ramped barbs allow for
secure foot placement
without insertion difficulty
Easily accessible SPD
tensioning adjustment
Secure strap design to
prevent slipping when
tightening, as well as
excessive wear
Re-angled SPD clip
position provides greater
clearance between the
cage and the ground
when using the SPD clips
The flexible, forged chromoly
steel-axle design evenly
distributes stress load and is
machine- and heat-treated
for maximum strength
BIKE
COMPONENTS