Vehicle PTZ Camera
User Manual
42
42
Picture 5-8 Register to VMS
5.2.2 ONVIF
ONVIF protocol is enabled by default. Search and add devices by ONVIF on VMS and the camera will be
added to the VMS automatically. User does not need to configure at the web client.
5.2.3 Access Public Network by 4G
The steps for the camera to access public network when using 4G signal:
1) Insert a SIM card in the camera and power it on. Open the web client and go to
Settings > Network >
IP and Port > Mobile Network
. Check
“
Enable Mobile Network
” and click “
Save
”.
Picture 5-9 Enable mobile network
2) On the interface of
Settings > Network > IP and Port > LAN
, set gateway as 0.0.0.0.
3) Open the PMC interface of VMS in public network and click
Manage Device > Add
.
Picture 5-10 Input parameters
