Vehicle PTZ Camera
User Manual
38
38
Picture 5-3 Add connect
2) Input
“Password” and check “
Show advanced options
”. The default IP Mode is “DHCP”. If
selecting
“Static”, enter IP Address, Subnet Mask, Default Gateway and etc. Click “
Save
”.
Note:
1) When switching from AP to STA mode, if there is a gateway in the LAN, remove it.
2) When switching from AP to STA mode, wait a moment before going to the wireless connection
interface. The status becomes WiFi reminder when the mode is STA. Refresh till it shows that the
router has been connected to, which means the WiFi is available.
3) Go back to the
Wireless Configuration
interface. The
Hot List
displays all available networks, as
shown below. The wireless network connects to the last one on the list automatically. After
connection, it displays
“
Connect
” under the network.
Select a network from the list and click “
Attribute
” and edit on the popup interface; click “
Shift Up
”
and the network will move up on
the list; click “
Delete
” to remove the network from the list. When
the networks change their positions on the list, the last one on the list will connect automatically.
Keep clicking “Refresh” and it will show “Connect”.
